Panasonic PN261693-NZ Installation Manual Download Page 1

Page: 1 / 23

Installation Guide



Thank you for purchasing our product.



This document provides important information about safe and proper
operations of this Ethernet Switch.



Please read the

"Important Safety Instructions" on pages from 3 to 6



Any problems or damages resulting from disassembly of this Ethernet
Switch by customers are not covered by the warranty.

C0620-40822 Printed in Japan

GA-M

Model No.

PN261693-TH

PN261693-MY

PN261693-ID

PN261693-SG

PN261693-NZ



The instruction manuals (Menu, Version, CLI Version
Web Version), latest firmware and SDN application
(ZEQUO assist Plus) can be downloaded from the following URL.

https://panasonic.co.jp/ew/pewnw/english/datadownload/index.html

2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021
©

Panasonic Electric Works Networks Co.,Ltd.

Panasonic Electric Works Networks Co.,Ltd. 2022

Summary of Contents for PN261693-NZ
























Search results

Summary of Contents for PN261693-NZ

Reviews:

Related manuals for PN261693-NZ

Brands by name

Popular brands

Panasonic PN261693-NZ, Installation Manual

Search results

Summary of Contents for PN261693-NZ

Reviews:

Related manuals for PN261693-NZ

Brands by name

Popular brands