Panasonic Panafax UF-7000, Fax Manual

Page: 111 / 150

111
S
e
tt
ing Y
our
M
a
ch
ine
022 SUBSTITUTE RECEIVE 1 Invalid Selecting whether the machine receives to memory
when the recording paper runs out, toner runs out or
the recording paper is jammed.
*2 Valid
023 REC. PAPER SIZE (----) Selecting the Paper Tray and paper size.
(See page 118)
024 PRINT REDUCTION 1 Fixed Selecting print reduction mode.
Fixed : Reduce received document according to
setting of Parameter No. 25.
Auto : Reduce received document according to the
length of received documents.
*2 Auto
025 REDUCTION RATIO 70 70% Selecting the fixed print reduction ratio from 70% to
100%. This parameter functions only when the fixed
print reduction is selected on Fax Parameter No. 24.
---- ----
*100 100%
026 POLLING PASSWORD (----) Setting a 4-digit password for secured polling.
027 POLLED FILE SAVE *1 Invalid Selecting whether the machine retains the polled
document in memory even after the document is polled
once.
2 Valid
028 STAMP AT MEMORY
XMT
1 Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory.
(depending on the Stamp setting on the Control Panel.
If the setting is "Invalid", the machine will not stamp
even if the Stamp LED light is ON)
*2 Valid
031 INCOMPLETE FILE
SAVE
*1 Invalid Selecting whether the machine retains the document in
memory if the document is not successfully
transmitted.
2 Valid
034 ENERGY SAVER MODE 1 Invalid Select a Energy Saver mode and time.
1 : Invalid / 2 : Power Saver / 3 : Sleep / 4 : Shutdown
Mode timer : 1-240 min.
2 Power Save
*3 Sleep
4 Shutdown
035 DAYLIGHT TIME 1 Invalid Selects whether to enable the daylight time feature.
*2 Valid
036 RING PATTERN DETECT
(DRD)
(See page 115, Note 2)
*1 Invalid All ring patterns.
2 Valid Select a ring pattern for automatic answering.
1 : A Standard ring pattern.
2 : B Double ring pattern.
3 : C Triple ring pattern (Short-Short-Long).
4 : D All other triple ring patterns, except the
type C described above.
037 RECEIVE TO MEMORY (----) Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO
MEMORY). When F8-5 is set to On, this parameter will
not be shown on the LCD display. If you wish to
change the password, F8-5 is set to Off first.
038 ACCESS CODE (----) Enter a 4-digit Access Code to secure the machine
from unauthorized use. (See page 84)
039 PIN CODE ACCESS *1 None Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code.
2 Suffix
3 Prefix
052 DIAGNOSTIC
PASSWORD
(----) Setting the password for Remote Diagnostic Mode.
Please ask your Panasonic Authorized Dealer for
details.
No. Parameter
Setting
Number
Setting Comments