Panasonic Panafax UF-550 Page 179 User Manual Download

Page: 179 / 184

175

Glossary

Multi-station transmission

The ability to broadcast the same set of documents to a programmed
number of locations.

Multi-file transmission

The ability to store many files into your machine’s memory before actual
telephone connection occurs.

Network address

An individual 4-digit addressing number assigned to a One-Touch/
Abbreviated number that identifies a particular station in a relay network.

Network password

A 4-digit password assigned to a network address to prevent unauthorized
stations from accessing a relay station.

Off-hook dialling

The direct dialling of a telephone number with the handset out of the cradle
or ”off the hook.”

OMR-XMT

Is used to transmit to a system, such as Fax Server, that has OMR Sheet
reading capability.

On-hook dialling

The direct dialling of a telephone number with the handset in the cradle or
”on the hook.”

One-Touch dialling

The ability to dial an entire telephone number by pressing one key.

Overlap Printing

Documents too long to be reduced are automatically printed on two pages
with approximately 10 mm overlap.

Panasonic Super Smoothing

An electronic image enhancement (Panasonic Super Smoothing) that will
create a particular pattern for the improvement of copy quality.

Polling

The ability to retrieve a document from another facsimile machine.

Polling password

A 4-digit programmed code that enables the security of a document being
polled.

Power Failure Report

A report that contains information on the last transaction that took place
during a power outage.

Power Saver Mode

To reduce the power consumption of the machine in standby, select the
time period to turn OFF the high temperature fuser unit when the printer
is idle.

Print Collation

The ability to stack received documents in the correct order.

Print reduction modes

The methods used to determine how an incoming document will be
reduced to print onto the paper loaded in your machine.

Program keys

Keys that are defined for storing a sequence of stations to be dialed or
polled.

PSTN

Public Switched Telephone Network. Network of interconnected switching
equipment and transmission facilities.

Receiving password

A 4-digit password that is checked before a document is received.

09007000001

09007990047

09007990048

09007990049

09007990050

09007990051

09007990092

09007990052

09007990053

09007990093

09007990055

09007990056

09007990057

09007990058

09007990094

09007990095

09007990059

09007990060

09007990061

09007990062

Summary of Contents for Panafax UF-550

























































































































































































Search results

Summary of Contents for Panafax UF-550

Reviews:

Related manuals for Panafax UF-550

Brands by name

Popular brands

Panasonic Panafax UF-550, User Manual

Search results

Summary of Contents for Panafax UF-550

Reviews:

Related manuals for Panafax UF-550

Brands by name

Popular brands