PAN9520 ETU Evaluation Tool
3 PAN9520 ETU
User Guide Rev. 1.0
Page 20 of 35
3.10 Current Measurement
Unplug Jumper on X5
To cut the direct power supply to the PAN9520, the Jumper on X5 must be
unplugged. Otherwise a current measurement will not work.
The ETU provides the feature to measure the current of the PAN9520, independent from the
peripheral components.
The following setup can be used for the current measurement:
If a power profiling is needed, the
“nRF Power Profiler Kit II” from Nordic can
be used.
+3V3 Module
A
+3V3
I