– 21 –
Chapter 2 Description of Parts — Audio (input) function section
Audio (input) function section
3
5
1
6
2
4
1 <MIC IN> (microphone input) terminal (page 96)
f
Connect the microphone (optional).
f
Can also be used for connecting the phantom microphone. When
using the phantom microphone, set the [F.MIC POWER] item on the
setting menu [AUDIO SETUP] screen to [ON]. When it is set to [ON]
and a microphone is not connected, low-frequency noise may occur.
This is not a problem when a microphone is connected.
2
<F.AUDIO LEVEL> (audio recording level adjustment) dial
f
Adjust the recording level of audio channels 1 to 4.
f
When the adjustment method for the recording level is set to
[MANU] on the [AUD02:INPUT] screen of SmartUI, the recording
level of the audio channel can be adjusted with this dial.
f
Set which input terminal operation of this control works on by the
[FRONT VR CH1], [FRONT VR CH2], [FRONT VR CH3], and
[FRONT VR CH4] items on the setting menu [AUDIO SETUP]
screen.
3
<AUDIO IN CH1/3>, <AUDIO IN CH2/4> (audio input channel 1/3,
Connect audio equipment or the microphone.
4
<LINE>/<MIC> (line input/microphone input) selector switch
Switch the audio input signal connected to <AUDIO IN CH1/3> and
<AUDIO IN CH2/4> (audio input channels 1/3, 2/4) terminals.
<LINE>
Audio input signals from line-input audio equipment
<MIC>
Audio input signal from the microphone
5 Microphone input <
+
Turn on/off the power supply to the microphone connected to the
<AUDIO IN CH1/3> and <AUDIO IN CH2/4> (audio input channels
1/3, 2/4) terminals.
<
+
48V>
Supplies
+
48 V power to the microphone.
<OFF>
Does not supply power to the microphone.
@
@
NOTE
t
When microphone input <
+
48V> is set and microphones are not
connected to the <AUDIO IN CH1/3> and <AUDIO IN CH2/4>
terminals, low-frequency noise may occur. This is not a problem
when a microphone is connected.
Mount the UniSlot wireless receiver (optional).
