Panasonic P2HD AG-HPX610EJ Page 151 Operating Instructions Manual Download

Page: 151 / 179

– 151 –

Chapter 9 Connecting to External Devices — Connecting to the remote control unit (AJ-RC10G)

Connecting to the remote control unit (AJ-RC10G)

Connect the remote control unit AJ-RC10G (optional) to remote-control some functions.

When you connect AJ-RC10G and set the <POWER> switches of the camera and AJ-RC10G to <ON>, the camera automatically enters the remote
control mode.

<REMOTE> terminal

AJ-RC10G

NOTE

When connecting and disconnecting the dedicated cable, ensure that you turn the <POWER> switches of the camera and AJ-RC10G to

<OFF>.

Do not use any cable other than the AJ-RC10G dedicated cable or dedicated optional cable. Doing so may result in a malfunction.

The <USER> buttons (<USER MAIN>/<USER1>/<USER2>) and the <MENU> button do not activate during AJ-RC10G connection.

Refer to the operating guide of “AJ-RC10G for AG-HPX600/610 series (AG-HPX600P/HPX610P/HPX600EJ/HPX610EJ/HPX600EN)” at the

following website:

http://pro-av.panasonic.net/en/manual/index.html

For details on the current from the <REMOTE> terminal, refer to “Details of the connector signals” (page 173).

Summary of Contents for P2HD AG-HPX610EJ




















































































































































































Search results

Summary of Contents for P2HD AG-HPX610EJ

Reviews:

Related manuals for P2HD AG-HPX610EJ

Brands by name

Popular brands

Panasonic P2HD AG-HPX610EJ, Operating Instructions Manual

Search results

Summary of Contents for P2HD AG-HPX610EJ

Reviews:

Related manuals for P2HD AG-HPX610EJ

Brands by name

Popular brands