Before using
7
VQT0N50
Fitting the lens cap (optional)
Fit the lens cap to protect the surface of the lens.
If you do not use the movie camera when the MC
protector or the ND filter of the Filter Kit
(VW-LF37WE; optional) is attached to the front of
the lens hood, attach the lens cap to protect the
surface of the lens.
1
Remove the grip belt. Run the end of the
lens cap cord through the hole in the grip
belt attachment part and run the lens cap
through the lens cap cord.
≥
The lens cap removed can be hung on the lens
cap fixture. (It cannot be hung if the grip belt is
used as a hand strap.)
≥
To fit or remove the lens cap, hold both sides of
the lens cap with the tips of your first 2 fingers.
The one-touch free-style grip belt
ª
To use as a hand strap
If you use the grip belt as a hand strap, then you
can carry or handle this camera more easily.
1
Open the lock cover
1
by pinching the
projections
2
on both sides. Press the lock
button
3
to remove the grip belt.
≥
When removing the grip belt, tightly hold the
camera with both hands.
≥
After removing the grip belt, restore the lock
cover to the original position.
2
Adjust the belt length.
1
Flip the belt.
2
Slide
1
in the direction indicated by the arrow.
3
Fix the belt.
3
Put your hand through the strap.
≥
Use the free style remote control with mic for
more convenience.
≥
Hold the movie camera not to cover the
microphones or the sensors with your hands.
ª
To restore the strap to the grip belt
≥
When returning the grip belt to the grip belt
attachment part, press the lock cover
1
and
check if the grip belt is securely locked.
2
1
3
1 3
2
1
1
GS150_GN.book 7 ページ ２００５年１月６日 木曜日 午後４時５０分
