44
≥
When [PROGRESSIVE] on the [CAMERA SETUP]
Sub-Menu is set to [ON], the digital modes of [EFFECT1]
on the [DIGITAL EFFECT] Sub-Menu cannot be used.
(
l
ª
Wipe Mode and Mix Mode
If either one of the following operations is carried out, stored
images will be erased, and Wipe and Mix Functions cannot
be used.
≥
Use the Camera Search Function
≥
Press the [STILL] Button
ª
Playing Back
Repeat Playback
If you continue to press the [
1
] Button for 5 seconds or
longer, the Movie Camera switches to Repeat Playback
Mode, and the [R
!
] Indication appears. (To cancel Repeat
Playback Mode, set the [OFF/ON/MODE] Switch to [OFF].)
Listening to Playback Sound through
Headphones
If you want to use headphones to listen to the playback
sound, set [AV JACK] on the [AV IN/OUT SETUP] Sub-
Menu to [OUT/PHONES] and connect headphones to the
[PHONES] Socket (
l
7) on the Movie Camera. In this case,
no sound (including a warning sound and shutter sound) will
not be reproduced through the built-in speaker of the Movie
Camera.
Choosing Sound during Playback
You can select the sound by using the [AUDIO OUT] setting
on the [PLAYBACK FUNCTIONS] Sub-Menu.
STEREO:
Stereo Sound (main sound and sub sound)
L:
Left channel sound (main sound)
R:
Right channel sound (sub sound)
≥
If an attempt was made to perform audio dubbing for what
was recorded with [12bit] selected as the [AUDIO REC]
setting, the sound played back will be set to stereo
regardless of the [AUDIO OUT] setting if [12bit AUDIO] is
set to [MIX].
ª
Index Search Functions
≥
Index Search may not be possible at the beginning of tape.
≥
Because Photoshot Index Signals are not recorded on still
pictures recorded in Continuous Photoshot Mode, the
Photoshot Index Search Function cannot be used for these
still pictures.
≥
Scene Index Search may not function properly if the
interval between 2 scene index signals is shorter than 1
minute.
ª
Playback Digital Effect Functions
≥
Signals of images to which digital effects are added during
playback cannot be output from the DV Terminal (
l
6) or
Digital Still Picture Terminal (
l
33).
≥
You cannot use the Wipe or Mix Function while playing
back the non-recorded portion of tape.
ª
Playback Zoom Function
≥
You cannot adjust the sound volume with the Remote
Controller in Playback Zoom Mode.
≥
If you turn off the Movie Camera power or if you switch
from VCR Mode to Camera Mode, Playback Zoom Mode is
automatically cancelled.
≥
Even if Playback Zoom Functions are being used, images
that are output from the DV Terminal (
l
6) or Digital Still
Picture Terminal (
l
≥
As you enlarge an image, the quality of image suffers.
≥
During a Playback Zoom, the Variable Speed Search
Function cannot be changed with the Remote Controller.
ª
Playing Back on Your TV
≥
If you set [AV JACK] on the [AV IN/OUT SETUP]
Sub-Menu to [IN/OUT], nothing will be shown on the TV
screen except during playback.
ª
Audio Dubbing
≥
The blank section of a tape cannot be dubbed.
≥
Sounds sent through the DV Terminal cannot be dubbed.
≥
If a tape has a non-recorded portion when the tape is
dubbed, images and sounds may be disturbed when this
portion of the tape is played back.
≥
If you set the tape counter back to 0 at the position where
you want to stop Audio Dubbing so as to make it possible
to use the Memory Stop Function (
l
50), Audio Dubbing is
terminated automatically when the tape reaches this
position.
≥
In the case of importing data recorded with Audio Dubbing
to a PC using the PC’s software programme, only the
original sound (ST1) may be imported, depending on the
software programme.
ª
Recording the Contents of Other
Equipment
Recording to a Card
If you set the [TAPE/CARD] Selector to [CARD], you can use
the Card Photoshot function for external input signals.
≥
Black streaks may appear at the 4 edges of the image.
≥
When the [PHOTO SHOT] Button is pressed, the image
may seem to move backward momentarily, but this does
not affect the recording.
≥
While recording with analog input, a Card Photoshot
cannot be used.
Analog-Digital Conversion
≥
When the Movie Camera is connected with other digital
video equipment through its DV Terminal, images recorded
in analog form from other external equipment can be output
to the digital video equipment through the DV Terminal.
≥
To DV-output analog video signals sent from other
equipment, set [DV OUT] on the [AV IN/OUT SETUP]
Sub-Menu to [ON]. (Normally, keep the [DV OUT] set to
[OFF]. If it is set to [ON], the quality of the image may be
disturbed.)
ª
Using the DV Cable for Recording
(Digital Dubbing)
≥
Regardless of the setting, digital dubbing is carried out
automatically in the same audio recording mode as that of
the Cassette on the playback-side.
≥
The images on the monitor of the recording side may be
disturbed, but it does not affect the recorded images.
≥
Even if Playback Digital Effects, Playback Zoom, or
Playback Title In have been used, these effects are not
output from the DV Terminal.
≥
Even if you use device equipped with DV Terminals (such
as i.LINK), you may not be able to perform Digital Dubbing
in some cases.
ª
Autoprint
≥
When the cooling function of a video printer has been
working and the printing speed is dropping, Autoprint may
stop. When this happens, set [AUTO PRINT] to [YES] once
more.
≥
If you replace the Ink Cassette or paper during printing, the
same picture may be printed twice.
≥
When the Movie Camera is not connected to the video
printer properly, when the Ink Cassette is not inserted or is
empty, or when the printer is out of paper, the
[PRINTER ERROR] Indication appears.
≥
Some Photoshot images may be skipped during Autoprint.
A.book 44 ページ 2001年7月28日 土曜日 午前9時27分