106
Questions and Answers
Q: The oven stops cooking by
microwave and ‘H97’ or ‘H98’
appears in the display. Why?
A: This display indicates a problem with the
microwave generation system. Please
contact an authorised Service Centre.
Q: The fan continues to rotate after
cooking. Why?
A: After using the oven, the fan motor may
rotate to cool the electrical components.
This is normal and you can continue
using the oven at this time.
Q: Can I check the pre-set oven
temperature while cooking or
preheating by
oven
?
A: Yes. Touch
oven
and the oven
temperature will appear in the display
window for 2 seconds.
Q: “DEMO MODE PRESS ANY KEY”
appears in the display and the oven
does not cook. Why?
A: The oven has been programmed in
demo mode. This mode is designed for
retail store display. Deactivate this mode
by touch Micro Power once and
Stop/Cancel 4 times.
Q: The operation guide has disappeared
on my display, I can only see
numbers. Why?
A: The operation guide was turned off by
tapping Timer/Clock 4 times. When
colon or time of day is displayed, touch
Timer/Clock 4 times to turn the operation
guide back on.
Q: The oven stops cooking by steam
or combination with steam and U14
appears in the display.
A: The water tank is empty and the
operation guide has been turned off.
Re-fill the water tank, position back in the
oven and touch Start to resume cooking.
If this happens 3 times during operation,
cooking will stop. Press Stop/Cancel to
reset.
Q: The control panel keys do not
respond when tapped. Why?
A: Ensure the oven is plugged in. The oven
may be in stand-by mode. Open and
close the door to activate.