English
English
17
16
Q&A
Question
Answer
Why click sound or
metallic sound be heard
while using or shaking
the iron?
►
These sounds are made by
the internal parts of the iron,
spray mechanism, leakage
prevention, etc., moving
slightly. This is normal.
Why do the clothes
sometimes become
brown after being ironed?
►
If there is laundry detergent
remaining on the fabric, the
clothes may become brown
after being ironed.
Why are there white
powder/particles coming
out of the steam vents
while using the steam
function (especially when
using " power shot ")?
►
The powder/particles are
hydrophilic treatment or
impurities and minerals
found in hard water etc.
These are not harmful and
can be brushed off clothing.
Trouble shooting
Problem
Causes, Solution
No
heating
►
Make sure the power plug is plugged into
socket-outlet.
No
steam
Poor
steaming
power
►
Fill the water reservoir with tap water up to
"
MAX
" dot.
►
If there is no steam, set the steam/dry selector
to the steam position, or set the temperature
selector to "
MAX
".
►
For poor steam, move the steam/dry selector
several times, then reset to the steam position.
►
Press the power shot button several times
when the " power shot " appears insufficient.
►
Wait until the thermostat operating indicator
light goes off before using the iron.
►
Set the temperature selector to "
MAX
".
No spray
►
Push the spray mist trigger several times.
►
Fill the water reservoir with tap water up to
"
MAX
" dot.
Water
leaks
from
steam
vents
►
Press the power shot button in intervals of at
least 2 seconds when using the " power shot ".
►
Wait until the thermostat operating indicator
light goes off before using the iron.
Clothes
are
marked
►
Empty the water reservoir and fill it with clean
water. There may be contaminants in the
iron/cup.
Anti-drip system (automatic water seal)
This model has an anti-drip system. When the temperature
of the soleplate’s surface drops to low, the valve for the
vaporizing chamber in the iron automatically closes and stops
the water from flowing. This prevents hot unvaporized water
from spewing out from the soleplate when the iron has cooled
down.With this system, it is unnecessary for you to wait until
the inside of the vaporizing chamber dries completely when
you store the iron.
Note:
• It is not a sign of malfunction even a click sound is heard.
This sound can be heard whenever this system is activated.
How to care for your iron
►
Surface of the iron
• After unplugging and cooling the iron, simply wipe off with a
damp cloth and if necessary, use a mild detergent.
• Never use any strong cleaners.
►
Soleplate
• Starch and other residue may be easily removed from the
soleplate with a damp cloth.
• To avoid scratching the surface, never use a metallic pad to
clean the soleplate, and never place the iron on a rough
surface.
• The best way to remove synthetic residue from the
soleplate is to iron over an old cotton cloth rag after heating
the iron.
Note:
Never use cleaners in the iron, since they may damage the
working parts of the iron. Some odor may be released
during initial use of the iron, however, this is normal and the
odor will not attach to your clothes. Never use steam iron
detergent in the iron, since they may damage the working
parts of the iron.
NI-S630,S530,S430 [i8200Q-oS43A]_说明书_EN,VN,AR.indb 10
NI-S630,S530,S430 [i8200Q-oS43A]_说明书_EN,VN,AR.indb 10
2022/4/29 11:05:04
2022/4/29 11:05:04
