18
English
19
English
Specifications
Rated voltage 220
-
240 V
50
-
60 Hz
Rated input
power
2 000
-
2 400 W
Dimensions
(of the
assembly)
(W
×
D
×
H) Approx. 43
×
25
×
165 cm
[When the ironing board stands upright]
Power plug/
Cord length
Single-phase 3-pole plug/Approx. 1.5 m
Hose length
Approx. 1.4 m
Water tank
capacity
Approx. 1.6 L
This product is intended for household use only.
Model
NI-GWF150
Weight
Approx. 7.2 k
g
Steam levels
(W
×
D
×
H) Approx. 71
×
43
×
91 cm
[When the ironing board is laid flat]
•
Cleaning the ironing cloth
When the ironing cloth is dirty, remove the ironing cloth by
reversing the steps in “Assembling the steam iron” on page 10
and wash it.
After each use
1. Place the iron head into the iron holder
properly.
2. Turn off the power button and disconnect
the power plug.
3. Take out the water tank from the power
base, open the water inlet cap, shake the
water tank to clean its inner wall with the
remaining water (or with the proper amount
of water refilled) and then drain the water
tank. After that, tighten the water inlet cap
and attach the water tank back into the
power base.
4. Check that the lock button on the telescopic
pole is locked securely, lift the whole
product by holding both telescopic poles
with your hands, and move the product to
a safe place for storage.
Notes:
a.Be sure to use both hands because the
power base is pretty heavy.
b.Before moving the product, make sure
that the water tank is empty.
After use
•
Cleaning the iron head
After each use, wipe the surface of the
iron head and the soleplate with a
soft cloth.
For stubborn stains, use a soft cloth
dipped with neutral detergent to clean.
•
Cleaning the soleplate surface
If glue or the like sticks to the soleplate
surface, wipe it with a wet cloth.
•
Cleaning the steam vents
If scale appears on the steam vents, remove the scale with a
bamboo stick, and then wipe the soleplate with a wet cloth.
•
Cleaning the filter
When the product has been used for a long time, the filter in
the power base may be clogged by dirt, thus reducing steam
or preventing steam from coming out. If the filter is clogged,
use a cotton swab or fine cotton cloth to clean the filter.
Cleaning
Notes:
a.After use, leave the product to cool down for more than
60 minutes before any cleaning or maintenance.
b.Never use such cleaning products as the thinner, cleanser
and volatile solvent to wash the product. Otherwise
damages may be caused.
Filter
Cleaning reference of the ironing cloth
Fabric: blended plain cloth
Function
display
Cleaning
Dry rion
Summary of Contents for NI-GWF150
Page 12: ...MEMO MEMO ...
