Panasonic NC-EH22P, Operating Instructions Manual

Page: 17 / 52

17
er
er)
How to Use
Pour in water with another container. Close the lid securely.
Securely plug the body plug horizontally into the body.
Plug into wall outlet. (
→
)
When the unit is not in use
Water starts
boiling
automatically. After the water has been
boiled, the following will
be indicated. The boiled water
will be kept warm at
approx. 190ºF (90ºC)
automatically.
LED Flashing LED Flashing LED Lit
LED LED LED
LED Lit LED Off LED Off
Time required to boil water (approx.)
NC-EH40P: 35 min. / NC-EH30P: 27 min. / NC-EH22P: 20 min.
(Amount of water: Maximum Water / Room temperature: 68ºF (20
ºC)
)
Press the key
to release lock.
The indicator light
beside the key will be lit.
Press key and dispense
the hot water.
The “Dispense” key will be re-locked
automatically in 10 seconds after you
stop dispensing hot water.
Lit
Unplug, and remove the lid. Pour out any remaining hot water slowly via
the
mark.
Lid release part
Operation panel
Cautions
●
Do not pour out water too quickly.
If water splashes over lid release part or
operation panel, it may cause a malfunction.
●
Do not leave water standing in the container.
(It may cause the container to corrode or smell.)
• The indication
is estimated water
temperature.
Operating NC-EH40_EN.indd 17 11/7/07 3:57:31 PM