13
2. Turn the connector upper clockwise with long nose pliers.
Then the Cutter Assy and connector upper can be
removed.
6.3.
Bottom plate
1. The bottom plate can be removed when its four screws
are lossened.
6.4.
Connector(Lower)
1. Hold the part under the motor shaft by means of a
screws-driver, then turn the connector (lower) clockwise.
The connector (lower) can be removed.
• The connector (lower) can be relatively easily removed
by means of hitting its projecting section clockwise with
use of a screwdriver grip in a forceful manner.
Summary of Contents for MX-101SP2WTB
