11
5.3.
The blender
5.3.1.
SYMPTOM : Cutter won ’ t rotate
5.3.2.
SYMPTOM : Motor rotates but cutter doesn ’ t rotate
5.3.3.
SYMPTOM : Noise, vibration
5.3.4.
SYMPTOM : Juice leakage
(Notes)
Do not attempt to clean parts with boiling water.
Do not attempt to use fire to quickly dry parts.
Orange juice stains, etc. can be removed by using alcohol or detergent. Avoid using volatile substances when cleaning.
Cause
Remedy
Main shaft binding
Disassemble and oil, or replace
Cause
Remedy
Gear is worn out
Replace the gear (cutter base)
Cause
Remedy
Bad gearing of container and motor
Make the gearing correct
Gear is eccentric (bearing)
Repair or replacement (bearing)
Deformed or broken cutter
Repair or replacement
Cause
Remedy
Broken container
Replace the container
Bad container base
Replace the packing
Loose fastened part
Fasten it tightly
Main shaft is worn out
Replace the main shaft and bearing
Summary of Contents for MJ-J176PWTC
