Panasonic MINAS A5 Series, Operating Instructions Manual

Page: 109 / 477

2-61
1
Before Using the Products
2
Preparation
3
Connection
4
Setup
5
Adjustment
6
When in T
rouble
7
Supplement
Servo-on signal accept timing on power-up
Caution
‡7KHDERYHFKDUWVKRZVWKHWLPLQJIURP$&SRZHU21WRFRPPDQGLQSXW
‡$FWLYDWHWKHH[WHUQDOFRPPDQGLQSXWDFFRUGLQJWRWKHDERYHWLPLQJFKDUW
*1. In this term Servo-ON input (SRV-ON) turns ON as a hard ware, but operation com-
mand can not be received.
65'<RXWSXWZLOOWXUQRQZKHQERWKFRQGLWLRQVDUHPHWLQLWLDOL]DWLRQRIPLFURFRP
-
puter has been completed and the main power has been turned on.
*3. After Internal control power supply , protective functions are active from approx. 1.5
sec after the start of initializing microcomputer. Please set the signals, especially for
protective function, for example over-travel inhibit input (POT, NOT) or external scale
input, so as to decide their logic until this term.
The lapse time can be changed with Pr6.18 Wait time after power-up.
Servo-Ready output
(S-RDY)
Servo-ON input
(SRV-ON)
External brake
release output
(BRK-OFF)
output Tr OFF output Tr ON
input coupler ON input coupler OFF
Control
power supply
(L1C,L2C)
Internal control
power supply
Action of
driver CPU
Main
power supply
(L1,L2,L3)
Dynamic
brake
Motor
energization
Position/Speed/
Torque command
10ms or longer
*2
10ms or longer
*2
OFF
OFF
ON
reset (initialization) usually operation
OFF ON
output Tr OFF (brake engaged) ON
(brake released)
released engaged
not-energized energized
No command entry Command
entry
100ms or longer
*1
approx.2s
approx.100 to 300 ms
approx.1.5s
established
approx.60ms
approx.2ms
approx.4ms
0ms or longer
0s or longer
*3
2
Preparation
10.
Timing Chart
Timing on power-up
Related page
‡3´'HWDLOVRISDUDPHWHUµ
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com