background image

Operating Instructions

Vacuum Cleaner

Model No.

MC-UL672

We would advise that you carefully study these Operating Instructions before attempting
to operate the vacuum cleaner and that you note the Important Safety Instructions.
Please keep in a safe place with your Authorised Dealer Service booklet.
This product complies with the European directive 73/23/EEC and 89/336/EEC and with the Australian
Standards AS 3350.2.2 (1995) and Australian EMC requirements for the C-Tick Mark.

Matsushita Electric Industrial Co., Ltd

http://www.panasonic.co.jp/global/

© 2007 Matsushita Electric Industrial Co., Ltd. All rights Reserved.

CØ1ZDBVØØEØØ
ACØ1ZDBVZØEØ
Printed in P.R.C.

REMINDER FOR CUSTOMER

The model and serial number of the product
may be found on the nameplate located at the
back of your vacuum cleaner. You should note
the model and serial number in the spaces
provided and retain this book for future
reference.

Model Number: ....................................
Serial Number:......................................
Date Purchased: ..................................
Where Purchased: ................................

Summary of Contents for MC-UL672











Reviews: