background image

11

DESCRIPTION

MC-E4011

MC-E4013

Handle

Product code

Product code

AMC8H99AA061

AMC8H99AA078

Handle screw

Product code

Product code

AMC8H10B1000

AMC8H10B1000

Dust compartment filters

Product code

Product code

(Main filer A and B)

AMC8S86AA000

AMC8S86AA000

Central filter 

Product code

Product code

AMC8F03AA000

AMC8F03AA000

Clean air filter 

Product code

Product code

AMC8F28AA000

AMC8S04W5000

Or

Or

HEPA Filter Type F-2H

AMC8S04W5000

Pre-filter

Product code

Product code

AMC8FZ2AC000

AMC8FZ2AC000

Dust compartment

Product code

Product code

AMC8T58AC0001

AMC8T58AD001

Dust compartment cover ass’y

Product code

Product code

AMC8T82AA061

AMC8T82AA078

Extension wand

Product code

Product code

AMC8A12AA034

AMC8A12AA034

Crevice nozzle

Product code

Product code

AMC8A13AA034

AMC8A13AA034

Dusting brush

Product code

Product code

AMC8A97G1034

AMC8A97G1034

Kit of 2 belts 

Product code

Product code

AMC8S03AA000

AMC8S03AA000

Beater bar ass’y

Product code

Product code

AMC8R98AA064

AMC8R98AA064

Hose

Product code

Product code

AMC8AZ0AB034

AMC8AZ0AB034

Note:

Specifications are subject to change without notice.

Sales and Support Information

Customer Care Centre

For UK customers: 0870 900 9043
For Republic of Ireland customers: 01 289 8333
Visit our website for product information
E-mail: 

[email protected]

Vacuum Cleaner Consumables / Accessories
(For UK and Republic of Ireland customers only)

Direct sales at Panasonic UK

Order accessory and consumable items for your product with ease and confidence by phoning
our Customer Care Centre Monday – Friday 9:00am – 5:30pm. (Excluding public holidays).

Or go on line through our Internet Accessory ordering application at 

www.panasonic.co.uk.

Most major credit and debit cards accepted.
All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd.
It couldn’t be simpler!
Also available through our Internet is direct shopping for a wide range of finished products,

take a browse on our website for further details.

Summary of Contents for MC-E4013













Reviews: