Panasonic MC-CG881C-SC79 Service Manual Download Page 1

© 2008 Matsushita Electric Industrial Co.,Ltd. All
rights reserved. Unauthorized copying and distribu-
tion is a violation of law.

Order Number VCB0808014CE

Vacuum Cleaner

Model No.

MC-CG881C-SC79
MC-CG881K-SP47

Product Color :Royal Silver
Destination

:Europe

TABLE OF CONTENTS

PAGE

PAGE

1 Specifications

-----------------------------------------------------

2

2 Location of Controls and Components

-------------------

3

3 Troubleshooting Guide

-----------------------------------------

5

4 Disassembly and Assembly Instructions

----------------

6

4.1. Remove the Dust cover assy. -------------------------- 6
4.2. Remove the Rear cover unit, Switch cover,

and the Pedal cover. -------------------------------------- 6

4.3. Remove the Upper body unit and Lower body

unit.------------------------------------------------------------ 7

4.4. Remove the Cord reel partition unit. ------------------ 8
4.5. Remove the P.C.B. A Unit. ------------------------------ 9
4.6. Remove the Motor. ---------------------------------------10

5 Wiring Connection Diagram

---------------------------------

12

6 Exploded View and Replacement Parts List

-----------

13

6.1. EXPLODED VIEW (ATTACHMENTS) --------------13
6.2. PARTS LIST (ATTACHMENTS) ----------------------14
6.3. EXPLODED VIEW (BODY UNIT) --------------------15
6.4. PARTS LIST (BODY UNIT) ----------------------------16

6.5. PACKING INSTRUCTIONS --------------------------- 18
6.6. PACKING LIST ------------------------------------------- 19

Summary of Contents for MC-CG881C-SC79












Reviews: