- 81 -
Advanced (Recording pictures)
[REC] Mode:
Taking a picture by setting the exposure manually
Determine the exposure by manually setting the aperture value and the shutter speed.
Set the [REC]/[PLAYBACK] selector switch to [
!
], and then set the
mode dial to [
].
• The Manual Exposure Assistance
A
appears for about 10 seconds.
Tilt the joystick towards
3
/
4
/
2
/
1
to set
the aperture value and the shutter speed.
B
Aperture Value
C
Shutter Speed
• Focus can be set manually when [MF] is displaying.
Press the shutter button halfway.
• The Manual Exposure Assistance
A
appears for
about 10 seconds.
• Set the aperture value and the shutter speed again
when the exposure is not adequate.
Take the picture.
∫
Manual Exposure Assistance
• The Manual Exposure Assistance is an approximation. We recommend checking the pictures
after taking them by using the review function.
Note
for the available aperture values and the shutter speed.
• The brightness of the LCD monitor/Viewfinder may differ from the brightness of the actual
pictures. Check the pictures using the Review function or Playback Mode.
• If the exposure is not adequate, the aperture value and the shutter speed turn red when the
shutter button is pressed halfway.
• [
] for flash cannot be set.
The exposure is adequate.
Set to faster shutter speed or larger aperture value.
Set to slower shutter speed or smaller aperture value.
B
C
A
