Advanced (Playback)
- 158 -
You can add text (comments) to pictures. After text has been registered, it can be included
in prints using [TEXT STAMP]
. (Only alphabetic characters and symbols can be
entered.)
Names set in [BABY1]/[BABY2] and [PET] in Scene Mode or [LOCATION] in travel date
are also recorded as the titles.
Select [TITLE EDIT] on the [PLAYBACK] Mode menu.
Press
3
/
4
to select [SINGLE] or [MULTI] and then
press [MENU/SET].
Press
3
/
4
/
2
/
1
to select text and then press
[MENU/SET] to register.
• Press [DISPLAY] to switch text between [A] (capitals), [a] (small
case) and [&/1] (special characters and numbers).
• The entry position cursor can be moved left and right with the
zoom lever.
• To enter a blank, move the cursor to [SPACE] or to delete an entered character, move
the cursor to [DELETE], and press [MENU/SET].
• To stop editing at any time during text entry, press [
‚
].
• A maximum of 30 characters can be entered. (Maximum of 9 characters when setting
names in [FACE RECOG.])
Press
3
/
4
/
2
/
1
to move the cursor to [EXIT] and then press [MENU/
SET] to end text input.
Press [
‚
] to return to the menu screen.
¢
¢
The menu screen is automatically restored when [MULTI] is selected.
• Press [MENU/SET] to close the menu.
[TITLE EDIT]
Select the picture, and then
press [MENU/SET] to set.
• [
’
] is displayed for pictures with titles
already registered.
[MULTI] setting
Press [DISPLAY] to set (repeat),
and then press [MENU/SET] to set.
[SINGLE]
[MULTI]
Press
2
/
1
to
select the picture.
Press
3
/
4
/
2
/
1
to
select the pictures.
• The setting is canceled when [DISPLAY] is pressed again.
