manualshive.com logo in svg

Panasonic Lumix S1R, Operating Instructions Manual

Share
Download
Panasonic Lumix S1R Operating Instructions Manual Download Page 257

11. Recording Videos

 

257

Headphones

You can record videos while monitoring their sound by connecting 
commercially available headphones to the camera.

0

Do not use the headphone cables with the length of 3 m (9.8 feet) or more.

0

When headphones are connected, beep sounds, AF beep, and electronic shutter 
sounds are muted.

0

When [XLR Mic Adaptor Setting] is set to [ON], the following settings are fixed:
– [Sound Rec Level Limiter]: [OFF]
– [Wind Noise Canceller]: [OFF]
– [Special Mic.]: [STEREO]
– [Sound Output]: [REC SOUND]

0

[Sound Rec Level Adj.] cannot be used when [XLR Mic Adaptor Setting] is set 
to [ON].

0

When the XLR Microphone Adaptor is attached, [Sound Rec Level Disp.] 
automatically turns [ON], and the recording level is displayed on the screen.

0

When the XLR Microphone Adaptor is attached, do not carry the camera by 
holding the XLR Microphone Adaptor. It may become detached.

0

If noises are recorded when using the AC adaptor, use the battery.

0

For details, refer to the operating instructions for the XLR Microphone 
Adaptor.

Summary of Contents for Lumix S1R






















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands