Panasonic Lumix S1H Operating Instructions Manual Download

Page: 458 / 626

15. Menu Guide

458

[Playback]

[Playback Mode]

[Magnify from AF
Point]

[ON]/

[OFF]

Displays the point focused with AF.
Enlarges the AF focus location when enlarging the image.

If the image was recorded in [High Resolution Mode] or is
out of focus, the centre of the image is enlarged.

This menu item can be registered to the Fn button.
(

367

)

[LUT View Assist
(Monitor)]

[ON]/

[OFF]

When playing back video recorded with [Photo Style] set to
[V-Log], this displays the images with LUT data applied on
the monitor/viewfinder.

This functions in tandem with [LUT View Assist (Monitor)]
in [V-Log View Assist] in the [Custom] ([Monitor / Display
(Video)]) menu.

For details, refer to page

310

[HLG View Assist
(Monitor)]

[MODE1]/

[MODE2]/[OFF]

At recording or playback of [HLG Photo] and HLG video, this
converts their colour gamut and brightness for display.

This functions in tandem with [Monitor] in [HLG View
Assist] in the [Custom] ([Monitor / Display (Video)]) menu.

For details, refer to page

314

[Anamorphic
Desqueeze Display]

[

]/[

[OFF]

This displays the de-squeezed images suited to the
magnification of the anamorphic lens on this camera.

This is linked with [Anamorphic Desqueeze Display] under
the [Custom] ([Monitor / Display (Video)]) menu.

For details, refer to page

316

Summary of Contents for Lumix S1H



















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Lumix S1H

Reviews:

Related manuals for Lumix S1H

Brands by name

Popular brands

Panasonic Lumix S1H, Operating Instructions Manual

Search results

Summary of Contents for Lumix S1H

Reviews:

Related manuals for Lumix S1H

Brands by name

Popular brands