Panasonic Lumix S1H, Operating Instructions Manual

Page: 449 / 626

15. Menu Guide
449
[Setup] menu ¨ [IN/OUT]
[Bluetooth]
[Bluetooth] ( l 469 )
[Send Image (Smartphone)] (
l
496 )
[Remote Wakeup] ( l 489 )
[Returning from Sleep Mode] (
l
482 )
[Auto Transfer] ( l 486 )
[Location Logging] (
l
488 )
[Auto Clock Set] ( l 490 )
[Wi-Fi network settings]
[Wi-Fi network settings]: Registers the Wi-Fi access point.
Wireless access points used to connect the camera to Wi-Fi
networks will be registered automatically.
[USB]
[USB Mode]
`
[
y
][Select on connection]/
[
z
][PC(Storage)]/
[ ][PC(Tether)]/
[
{
][PictBridge(PTP)]
This sets the communication method to be used when the
USB connection cable is connected.
[
y
][Select on connection]: Select this setting to select
the USB communication system when connecting to another
device.
[
z
][PC(Storage)]: Select this setting to export images to a
connected PC.
[ ][PC(Tether)]: Select this setting to control the camera
from a PC installed with “LUMIX Tether”.
[
{
][PictBridge(PTP)]: Select this setting when connecting
to a printer that supports PictBridge.
[USB Power Supply]
` [ON]/[OFF]
Provides power from the USB connection cable. ( l 43 )
0
Even if this item is set to [OFF], power will be supplied
when the AC adaptor is connected.