12. Connections with External Devices (Video)
342
Reduction of Wind Noise
This reduces wind noise when an external microphone is connected.
¨
[
]
¨
[
]
¨
Select [Wind Cut]
Settings: [HIGH]/[STANDARD]/[LOW]/[OFF]
0
You can register the [MANUAL] sound pickup range setting in an Fn button:
[
]
¨
[
]
¨
[Fn Button Set]
¨
[Setting in REC mode]
¨
[Mic. Directivity
0
While the external microphone is connected, [
] is displayed on the
screen.
0
When an external microphone is connected, [Sound Rec Level Disp.]
automatically turns [ON], and the recording level is displayed on the screen.
0
When [Mute Sound Input] is set to [ON], the audio input from the external
microphone is muted.
0
When the external microphone is attached, do not carry the camera by holding
the external microphone. It may become detached.
0
If noises are recorded when using the AC adaptor, use the battery.
0
When a Stereo Microphone (VW-VMS10: optional) is used, [Special Mic.] is
fixed to [STEREO].
0
Setting [Wind Cut] may alter the usual sound quality.
0
For details, refer to the operating instructions for the external microphone.
