Panasonic LUMIX DMC-ZS100 Owner'S Manual Download

Page: 57 / 406

SQW0547

Basics

Buttons/Dials/Levers Used for Recording

During playback

With information

Detailed information

display

Histogram display

Without information

([Highlight])

100-0001

AM10:00 DEC. 1.2016

100-0001

1/98

Without information

This screen is not displayed during Playback Zoom, Motion Picture Playback, Automatic Scrolling

Playback of panorama pictures, continuous playback or Slide Show.

This screen is displayed only when [Highlight] (below) in the [Custom] menu is set to [ON].

If no operation is performed for a few seconds, [ ] and other touch icons will disappear.

•A histogram of each color, including R (red), G (green), B (blue), and Y (luminance), is

separately displayed during playback.

Enabling/disabling the overexposed area display

→

[Custom

] → [

Highlight

] → [

ON] / [OFF]

You can set overexposed areas (areas that are too bright and where there are no shades

of gray) to flash on the screen when the [Auto Review] function is activated or during

playback. This does not affect recorded pictures.

•To reduce overexposed areas, record a picture by setting

negative exposure compensation

(→

177)

using the histogram

display

(→

55)

and so on as a reference.

•This feature is disabled during 4K photo playback, playback

of pictures recorded in Post Focus, Multi Playback, Calendar

Playback, or Playback Zoom.

Summary of Contents for LUMIX DMC-ZS100























































































































































































































































































































































































































Search results

Summary of Contents for LUMIX DMC-ZS100

Reviews:

Related manuals for LUMIX DMC-ZS100

Brands by name

Popular brands

Panasonic LUMIX DMC-ZS100, Owner'S Manual

Search results

Summary of Contents for LUMIX DMC-ZS100

Reviews:

Related manuals for LUMIX DMC-ZS100

Brands by name

Popular brands