Panasonic LUMIX DMC-ZS100 Owner'S Manual Download

Page: 216 / 406

216

SQW0547

Functions for specific subjects and purposes

Taking pictures automatically at set intervals

[Time Lapse Shot]

Recording mode:

You can preset data such as recording start time and time lapse to take still pictures

automatically. This setting is convenient for taking pictures at constant intervals for

landscape scenes, observation of the gradual changes in animals/plants, and other

applications. The pictures are recorded as a set of group pictures

(→

275)

. When [Time

Lapse Video] in the [Playback] menu is used, you can create a motion picture.

(→

293)

•

Complete the date and time settings in advance.

(→

42)

Set the menu

→

[Rec

] → [

Time Lapse Shot]

Press to select the item and press [MENU/SET]

[Start Time]

[Now]

Starts the recording by fully-pressing the shutter button.

[Start Time

Set]

Set the time to start recording. Any time up to 23 hours

59 minutes ahead can be set.

Press to select the item (hour and/or minute),

and to set the start time, and press [MENU/SET]

[Shooting

Interval] /

[Image

Count]

The recording interval and the number of pictures can be set.

Select the item (minute/second/number of pictures)

Setting

[MENU/SET]:

Set

•You can set the interval from 1 second to 99 minutes 59 seconds in

1-second intervals.

•You can set the number of pictures to be recorded from 1 picture to 9,999

pictures.

•Be sure to use an interval setting that is longer than the exposure time

(shutter speed) . (Illustration below)

If the interval setting is shorter than the exposure time (shutter speed)

(e.g. recording at night), it may cause the recording to skip.

First

Second

Third

•The camera may not be able to record using the preset interval and number

of pictures to be recorded under some recording conditions.

Press to select [Start] and press [MENU/SET]

Summary of Contents for LUMIX DMC-ZS100























































































































































































































































































































































































































Search results

Summary of Contents for LUMIX DMC-ZS100

Reviews:

Related manuals for LUMIX DMC-ZS100

Brands by name

Popular brands

Panasonic LUMIX DMC-ZS100, Owner'S Manual

Search results

Summary of Contents for LUMIX DMC-ZS100

Reviews:

Related manuals for LUMIX DMC-ZS100

Brands by name

Popular brands