Panasonic LUMIX DMC-ZS100 Owner'S Manual Download

Page: 179 / 406

179

SQW0547

Adjusting the focus and brightness (exposure)

Setting the ISO Sensitivity

Recording mode:

Set ISO sensitivity (sensitivity to lighting) manually.

We recommend higher settings to take clear pictures in darker locations.

Set the menu

→

[Rec

] → [

Sensitivity]

ZS100

Select the ISO sensitivity by rotating the

rear dial

ZS60

Select the ISO sensitivity by rotating the

control dial

ISO sensitivity

Press [MENU/SET]

•You can also press the shutter button halfway to set.

AUTO

ISO sensitivity is automatically set in a range up to 3200 (

ZS60

with the

flash on: 1600)

depending on the brightness of a subject.

(Intelligent ISO)

ISO sensitivity is automatically set in a range up to 3200 (

ZS60

with the

flash on: 1600)

depending on the movement and brightness of a subject.

•The shutter speed is not fixed when the shutter button is pressed halfway.

It is continuously changing to match the movement of the subject until the

shutter button is pressed fully.

ZS100

/100

/125/

200/400/800/

1600/3200/6400/

12800/25600

ISO sensitivity is fixed at the selected setting.

•When [ISO Increments] is set to [1/3EV], more ISO sensitivity settings can

be selected.

(→

181)

ZS60

80/100/200/400/

800/1600/3200/

6400

When [ISO Limit Set]

(→

181)

is set to other than [OFF], the ISO sensitivity is automatically set in

the range up to the [ISO Limit Set] setting value.

Only when [Extended ISO] is [ON].

Summary of Contents for LUMIX DMC-ZS100























































































































































































































































































































































































































Search results

Summary of Contents for LUMIX DMC-ZS100

Reviews:

Related manuals for LUMIX DMC-ZS100

Brands by name

Popular brands

Panasonic LUMIX DMC-ZS100, Owner'S Manual

Search results

Summary of Contents for LUMIX DMC-ZS100

Reviews:

Related manuals for LUMIX DMC-ZS100

Brands by name

Popular brands