Panasonic LUMIX DMC-TZ82 Operating Instructions Manual Download Page 273

Page: 273 / 406

273

DVQP1246

Playing Back and Editing Pictures

Switching the Playback Method

Viewing a list of pictures “Multi Playback”

Move the zoom lever toward W side

•Move the zoom lever toward the W side and you can switch the

display methods in the following order: 1-picture screen (full-

screen) → 12-picture screen → 30-picture screen → Calendar

screen. (Move the lever to the T side to return.)

•It is possible to switch the playback screen by touching the

following icons.

– [ ]: 1-picture screen

– [ ]: 12-picture screen

– [ ]: 30-picture screen

– [ ]: Calendar screen

•The screen can be switched gradually by dragging the screen up

or down.

•When you select a picture using the cursor button and press

[MENU/SET] on the 12-picture or 30-picture screen, the selected

picture is displayed on the 1-picture screen (full-screen).

TZ100/TZ101

TZ80/TZ81/TZ82

●

Pictures displayed with [!] cannot be played back.

Summary of Contents for LUMIX DMC-TZ82























































































































































































































































































































































































































Search results

Summary of Contents for LUMIX DMC-TZ82

Reviews:

Panasonic LUMIX DMC-TZ82, Operating Instructions Manual, Page: 273 / 406

Search results

Summary of Contents for LUMIX DMC-TZ82

Reviews: