Panasonic LUMIX DMC-TZ82 Operating Instructions Manual Download Page 23

Page: 23 / 406

DVQP1246

Preparations

Attaching the Hand Strap

We recommend attaching the hand strap when using the camera to prevent it from

dropping.

TZ100/TZ101

TZ80/TZ81/TZ82

Strap eyelet

TZ100/TZ101

Attaching the Shoulder Strap adaptor

You can use a shoulder strap (commercially available) by attaching a shoulder strap

adaptor (supplied) to the camera.

Attach a shoulder strap adaptor to the strap eyelet

on the camera

Strap eyelet

Pass your shoulder strap through the shoulder

strap opening of the strap adaptor

•Check the operating instructions that came with the

shoulder strap.

Shoulder Strap opening

Summary of Contents for LUMIX DMC-TZ82























































































































































































































































































































































































































Search results

Summary of Contents for LUMIX DMC-TZ82

Reviews:

Panasonic LUMIX DMC-TZ82, Operating Instructions Manual, Page: 23 / 406

Search results

Summary of Contents for LUMIX DMC-TZ82

Reviews: