Wi-Fi/NFC
Sending pictures to a PC
SQW0215
- 226 -
■
Sending selected pictures ([Send Images Stored in the Camera])
Select [New Connection] in the [Wi-Fi] menu, and press
[MENU/SET]
Use cursor button to select [Send Images Stored in the
Camera], and then press [MENU/SET]
Use cursor button to select [PC] and press [MENU/SET]
Select [Via Network] or [Direct] to connect
Select the PC you want to connect to
•If the PC you want to connect to is not displayed, select [Manual Input], then enter
the computer name (for Mac, enter the NetBIOS name).
Select the folder you want to send to
•When the connection is established, the confirmation screen for the transmission
setting is displayed. Check the setting and press [MENU/SET]. To change the
send setting, press the [DISP.] button.
Select [SINGLE] or [MULTI]
•To change the setting or disconnect, press [Wi-Fi] button.
■
When [SINGLE] is selected
Select the picture
Select [Set]
■
When [MULTI] is selected
Select the picture (repeat)
•If selected again, the setting will be cancelled.
Select [OK]
•The number of pictures that can be sent by
[MULTI] is limited.
•Confirmation screen is displayed. If you select [Yes], the operation is executed.