background image

Application (Record)

Recording panorama pictures  [Panorama Shot] Mode

SQW0215

- 123 -

 

The zoom position is fixed to the W end.

 

The focus, exposure and White Balance are all fixed to optimal values for the first 

picture. If the focusing or brightness of pictures recorded as part of a Panorama 

picture after the first picture are significantly different from those of the first picture, the 

Panorama picture as a whole (when all pictures are stitched together) may not have 

consistent focus and brightness.

 

The following functions are fixed to the settings indicated below. 

[Stabilizer]: [OFF]    [Date Stamp]: [OFF]

 

[White Balance] cannot be set when applying picture effects.

 

Since several pictures are stitched together to create a Panorama picture, some 

subjects may be distorted or the joining portions of successively taken pictures that 

are stitched may be noticeable.

 

The number of recording pixels per horizontal line and vertical line of a Panorama 

picture varies depending on the recording direction and number of stitched pictures. 

The maximum number of recording pixels is as follows:

 •Taking pictures in landscape orientation: Approx. 8000 x 1080

 •Taking pictures in portrait orientation: Approx. 1440 x 8000

 

Panorama pictures may not be created or pictures may not be recorded properly 

when taking pictures of the following subjects or when taking pictures in the following 

recording conditions:

 •Subjects that have a continuous monotone or pattern (sky, beach, etc.)

 •Moving subjects (person, pet, vehicle, waves, or flowers swaying in the wind, etc.)

 •Subjects whose colours or patterns change quickly (such as an image appearing on 

a display)

 •Dark locations

 •Locations with a flickering light source (fluorescent lamp, candle light, etc.)

 

When set to [High Key], the effect may be difficult to see, depending on the brightness 

of the subject.

 

When set to [Impressive Art], stitches may stand out.

 

While recording with [Soft Focus], [Star Filter], you cannot see the effects on the LCD 

monitor or viewfinder.

 

Settings will be stored even if the camera is turned off.

 

You can turn off display of guidelines by setting [Guide Line] to [OFF] in the [Setup] 

menu. 

(→67)

 

About panorama playback

Panorama pictures can be enlarged by operating the zoom lever the same way as with 

other still pictures. If you play back panorama pictures in the same way as playing back 

a motion picture, the panorama pictures are scrolled automatically. 

(→57)

 •Unlike motion picture playback, you cannot perform fast forward or fast rewind while 

the panorama pictures are scrolling automatically. (You can perform single-frame 

forward or rewind while the automatic scrolling operation is paused.)

Summary of Contents for Lumix DMC-TZ70GN


















































































































































































































































































































Reviews: