- 13 -
Preparation
• Charge the battery in areas with an ambient temperature, between 10
o
C and 30
o
C (50
o
F and
86
o
F) (same as the battery temperature), is recommended.
(Charging from the power outlet)
Connect the AC adaptor (supplied) and this camera with the USB connection
cable (supplied), and insert the AC adaptor (supplied) into the power outlet.
(Charging from a computer)
Connect the computer and this camera with the USB connection cable
(supplied).
• If the computer enters a suspended state while charging the battery, charging may stop.
• Connecting this camera to a notebook computer that is not connected to a power outlet will cause
the notebook computer battery to drain faster. Do not leave the camera connected for extended
periods of time.
• Be sure to always connect the camera to a computer USB terminal.
Do not connect the camera to a monitor, keyboard or printer USB terminal, or a USB hub.
Charging
Insert the battery into this unit.
Check that this unit is turned off.
A
To power outlet
B
AC adaptor (supplied)
C
PC (Turned on)
D
Insert the USB connection cable so that its
[
] mark will face the [
] mark side of the
camera.
E
Connect the USB connection cable
(supplied) to the [AV OUT/DIGITAL] socket.
F
Charging lamp
G
USB connection cable (supplied)
• Check the directions of the connectors, and
plug them straight in or unplug them straight
out.
(Otherwise the connectors may bend out of
shape, which may cause malfunction.)
• The socket is located on the lower part of the
camera when it is placed in an upright
position.
