- 12 -
Preparation
1
Slide the release lever in the direction of the
arrow and open the card/battery door.
• Always use genuine Panasonic batteries.
• If you use other batteries, we cannot guarantee the
quality of this product.
2
Being careful about the battery orientation,
securely insert it all the way in, and then
check that it is locked by the lever
A
.
To remove the battery, move the lever
A
in
the direction of the arrow.
3
1
: Close the card/battery door.
2
: Slide the release lever in the direction of
the arrow.
• Turn the camera off and wait for the “LUMIX” display on the monitor to clear before removing the
battery.
(Otherwise, this unit may no longer operate normally and the card itself may be damaged or the
recorded pictures may be lost.)
Inserting the Battery
