193
SQW0740
Using Menu Functions
Menu list
→
[Custom]
[Histogram]
Enabling/disabling the histogram display.
When set to [ON], you can move the display position of the histogram by pressing .
•Direct touch operation is also possible from the recording screen.
Displays distribution of brightness in picture – e.g.
if the graph peaks at the right, this means there are
several bright areas in the picture. A peak in the centre
represents correct brightness (correct exposure). This
can be used as a reference for exposure correction, etc.
(Example)
Dark
← OK →
Bright
●
When the histogram is not the same as that of the recorded picture under the following
conditions, histogram will be displayed in orange:
•During Exposure Compensation
•When the flash fires.
•When the correct exposure is not achieved, such as when the lighting is low.
[Guide Line]
Sets the pattern of the guidelines to be displayed while recording.
●
When you select [ ], you can move the position of the guideline by pressing .
●
You can also set the position directly by touching [ ] on the guideline of the recording screen.
●
The guideline is not displayed during panorama picture recording.
[Center Marker]
A cross [+] is displayed to indicate the centre of the recording screen. This is useful for
zooming while keeping the subject at the centre of the screen.
