Panasonic Lumix DMC-LX5 Basic Operating Instructions Manual Download Page 80

Page: 80 / 294

Preparation

- 36 -

• Refer to

P65

for details.

• The Auto Review function is activated regardless of its setting when using [AUTO BRACKET]

, [ASPECT BRACKET]

, [MULTI FILM]

, [BURST]

and

[SELF PORTRAIT]

(P94)

, [HI-SPEED BURST]

(P100)

and [FLASH BURST]

(P101)

in Scene

Mode.

• In Intelligent Auto Mode, the Auto Review function is fixed to [2SEC.].

• If [HIGHLIGHT]

(P34)

is set to [ON], white saturated areas appear blinking in black and white

when the Auto Review function is activated.

• [AUTO REVIEW] does not work when recording motion pictures.

• The folder number is updated and the file number starts from 0001.

(P189)

• A folder number between 100 and 999 can be assigned.

When the folder number reaches 999, the number cannot be reset. We recommend formatting

the card

(P40)

after saving the data on a PC or elsewhere.

• To reset the folder number to 100, format the built-in memory or the card first and then use this

function to reset the file number.

A reset screen for the folder number will then appear. Select [YES] to reset the folder number.

[PLAY ON LCD]

If you are using the External Live Viewfinder (DMW-LVF1;
optional), LCD monitor will automatically turn on when Recording
Mode is switched to Playback Mode.

[OFF]/[ON]

[AUTO REVIEW]

Set the length of time that the picture is displayed after taking it.

[OFF]
[1SEC.]
[2SEC.]
[HOLD]:

The pictures are displayed until one of the buttons is
pressed.

[START MODE]

Set whether to start up in [REC] Mode or [PLAYBACK] Mode after
turning the power switch [ON].

[

Enters [REC] Mode after turning on the power.

[

(

Enters [PLAYBACK] Mode after turning on the power.

[NO.RESET]

Reset the file number of the next recording to 0001.

Summary of Contents for Lumix DMC-LX5







































































































































































































































































































Search results

Summary of Contents for Lumix DMC-LX5

Reviews:

Panasonic Lumix DMC-LX5, Basic Operating Instructions Manual, Page: 80 / 294

Search results

Summary of Contents for Lumix DMC-LX5

Reviews: