Panasonic Lumix DMC-LX5 Basic Operating Instructions Manual Download Page 55

Page: 55 / 294

- 11 -

Before Use

Removing the Hot Shoe Cover

The camera comes with a hot shoe cover attached to the hot shoe.
To use the External Live Viewfinder (DMW-LVF1; optional)

(P196)

, External Viewfinder

(DMW-VF1; optional)

(P198)

or External Flash

(P199)

, please remove the hot shoe cover.

Press the hot shoe cover release button

and pull

the shoe cover in the direction of the arrow

Note

• When not using the External Live Viewfinder (optional), External Viewfinder (optional) or

External Flash (optional), be sure to attach the hot shoe cover.

• Please be careful not to lose the hot shoe cover.

• When not using the hot shoe cover, be careful not to let liquid, sand, or any other foreign matter

enter the connection terminals.

• Keep the Hot Shoe Cover out of reach of children to prevent swallowing.

Summary of Contents for Lumix DMC-LX5







































































































































































































































































































Search results

Summary of Contents for Lumix DMC-LX5

Reviews:

Panasonic Lumix DMC-LX5, Basic Operating Instructions Manual, Page: 55 / 294

Search results

Summary of Contents for Lumix DMC-LX5

Reviews: