Panasonic Lumix DMC-LX5 Basic Operating Instructions Manual Download Page 245

Page: 245 / 294

- 201 -

Others

Using the Conversion Lens (optional)

When the wide conversion lens is used, it is possible to achieve a wider field of view in
pictures of landscapes or the like.

Preparations:
Turn off the camera and remove the lens cap.

Remove the lens ring front.

• Be careful not to lose the lens ring front.

Attach the lens adapter.

Lens adapter (DMW-LA6; optional)

• The conversion lens and filters cannot be used

together. If any of these are fitted, be sure to remove

before fitting the conversion lens.

• Rotate the lens adapter slowly and carefully.

Attach the wide conversion lens.

Wide conversion lens (DMW-LWA52; optional)

• Ensure that screw parts of the lens adaptor and

wide conversion lens are properly tightened.

∫

The Focus Range When Using the Wide
Conversion Lens

• The focus range is 0.75 times the focal distance of

the camera.

Wide Conversion Lens

Zoom magnification

Actual magnification

0.75

35 mm film camera equivalent

18 mm

Summary of Contents for Lumix DMC-LX5







































































































































































































































































































Search results

Summary of Contents for Lumix DMC-LX5

Reviews:

Panasonic Lumix DMC-LX5, Basic Operating Instructions Manual, Page: 245 / 294

Search results

Summary of Contents for Lumix DMC-LX5

Reviews: