Panasonic Lumix DMC-LX5 Page 115 Basic Operating Instructions Manual Download

Page: 115 / 294

- 71 -

Advanced (Recording pictures)

∫

Adjust the flash output

Adjust the flash output when the subject is small, or the reflectivity is very high or low.

Select [FLASH ADJUST.] from the [REC] Mode menu, and
then press

(P28)

Press

to set the flash output and then press [MENU/

SET].

• You can adjust from [

2 EV] to [

2 EV] in steps of [1/3 EV].

• Select [0 EV] to return to the original flash output.

Press [MENU/SET] to close the menu.

• You can also close the menu by pressing the shutter button halfway.

Note

• When the flash output is adjusted, the flash output value appears on the upper left of the

screen.

• The flash output setting is memorized even if the camera is turned off.

• You cannot set [FLASH ADJUST.] in the following cases.

– In Intelligent Auto Mode

– In [FLASH BURST] in Scene Mode

Summary of Contents for Lumix DMC-LX5







































































































































































































































































































Search results

Summary of Contents for Lumix DMC-LX5

Reviews:

Related manuals for Lumix DMC-LX5

Brands by name

Popular brands

Panasonic Lumix DMC-LX5, Basic Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-LX5

Reviews:

Related manuals for Lumix DMC-LX5

Brands by name

Popular brands