Recording pictures (basic)
45
Use this when taking pictures in
places where use of the flash is not
allowed.
• Refer to P71 for setting the 1st and
2nd curtain.
ª
Available flash settings
¢
When setting to the 2nd Curtain
Synchro, flash setting is not available.
ª
The available flash range to take
pictures
• Refer to P36 for the focus range.
ª
Adjusting flash output
Adjust the flash output when the subject
is small or reflection ratio is extremely
high or low.
1
Press [
] until
[
FLASH] appears on the
screen to set the flash output.
• You can adjust this from
j
2 EV to
i
2 EV in steps of 1/3 EV.
• The determined flash output is
memorised even if the camera is
turned off.
ª
Bounce Flash
Bounce flash is a technique to take
pictures with reflecting the light to a
ceiling or a wall.
When you directly illuminate the front of
the subject, dark shadows may appear
on the subject or the skin colour in the
subject may be turned white. In this
case, you can defuse the shadows and
take pictures naturally by bounce flash.
±
±
±
j
±°
±°
±°
j
±
±
±
±
±°
±°
±°
±°
±
±
j
j
±°
±°
j
j
±
±
±
±
ISO
sensitivity
Available flash range
ISO AUTO
50 cm – 4.8 m (Wide)
50 cm – 4 m (Tele)
ISO100
50 cm – 4.8 m (Wide)
50 cm – 4 m (Tele)
ISO200
70 cm – 6.7 m (Wide)
70 cm – 5.6 m (Tele)
ISO400
1 m – 9.5 m (Wide)
1 m – 8 m (Tele)
SET
FLASH
REVIEW
REVIEW
LC1-GCSG.book 45 ページ ２００３年１２月２２日 月曜日 午後５時２８分