Panasonic Lumix DMC-GX80KEBK Owner'S Manual For Advanced Features Download Page 129

Page: 129 / 337

129

5. 4K Photo and Drive Settings

Select a 4K burst file on the playback screen, and
press

• 4K burst files are displayed with [

• You can also perform the same operation by touching the

icon [

• The slide view screen for selecting pictures will be

displayed.

Drag the frames to select the frame you want to save as a picture.

• You can also perform the same operation by pressing

Press [MENU/SET] to save the picture.

4K burst files recorded with [

] ([4K Pre-Burst])

Button

operation

Touch

operation

Description of operation

Dragging

Selects a frame

Pinching out/in Enlarges/reduces the display

Selects a frame while maintaining the enlarged display
(during enlarged display)

Dragging

Moves the enlarged area (during enlarged display)

In-focus portions are highlighted with color. ([Peaking])
• Switches in order of [OFF]

[ON] ([LOW])

[ON]

([HIGH]).

[DISP.]

Each time you press the button, the information display
mode changes in the following order:
Display with information

Display without information

Display with a histogram.

[MENU/SET]

Saves the picture

Summary of Contents for Lumix DMC-GX80KEBK


















































































































































































































































































































































Search results

Summary of Contents for Lumix DMC-GX80KEBK

Reviews:

Panasonic Lumix DMC-GX80KEBK, Owner'S Manual For Advanced Features, Page: 129 / 337

Search results

Summary of Contents for Lumix DMC-GX80KEBK

Reviews: