Panasonic Lumix DMC-GX80KEBK Owner'S Manual For Advanced Features Download Page 104

Page: 104 / 337

4. Focus, Brightness (Exposure) and Color tone Settings

104

Applicable modes:

You can move the AF area displayed on the viewfinder by
touching the monitor.

• Press the shutter button halfway to determine the focus position.

If you press [DISP.] before determining the focus position, the AF area frame returns to the
center position.

• To cancel the AF area frame when the Auto Focus Mode

(P97)

is set to [

] ([Face/Eye

Detection]), [

] ([Tracking]) or [

] ([49-Area]), press [MENU/SET].

• The Touch Shutter function

(P52)

is disabled when using [Touch Pad AF].

Not available in these cases:

•

The

[Touch Pad AF]

does not function in the following cases:

– When [4K Live Cropping] is set
– When [Pull Focus] in [Snap Movie] is set to [ON]

Setting the AF area position with the Touch Pad

[Custom]

[Touch Settings]

[Touch Pad AF]

[EXACT]

Moves the AF area of the
Viewfinder by touching a
desired position on the Touch
Pad.

[OFFSET]

Moves the AF area of the
viewfinder according to the
distance you drag the touch
pad

(P51)

[OFF]

—

Summary of Contents for Lumix DMC-GX80KEBK


















































































































































































































































































































































Search results

Summary of Contents for Lumix DMC-GX80KEBK

Reviews:

Panasonic Lumix DMC-GX80KEBK, Owner'S Manual For Advanced Features, Page: 104 / 337

Search results

Summary of Contents for Lumix DMC-GX80KEBK

Reviews: