Panasonic Lumix DMC-GF8 Page 71 Operating Instructions Manual Download

Page: 71 / 360

3. Recording Modes

Press [

• The camera will switch to either the most recently used of

Intelligent Auto Mode or Intelligent Auto Plus Mode.
At the time of purchase, the mode is set to Intelligent Auto
Plus Mode.

(P78)

• The Intelligent Auto lamp lights up when you set the

camera to Intelligent Auto Mode.

• If you press the button again, the Intelligent Auto lamp will go off, and the camera will be

set to the Recording Mode selected with the mode dial.

Align the screen with the subject.

• When the camera identifies the optimum scene, the

icon of the scene concerned is displayed in blue for
2 seconds, after which its colour changes to the usual
red. (Automatic scene detection)

Switching the operation method of the [

] button

[Custom]

[iA Button Switch]

[Single Press]:

It will switch to Intelligent Auto (

) Mode by pressing [

[Press and hold]:

It will switch to Intelligent Auto (

) Mode by pressing [

] for a while.

50 i

Summary of Contents for Lumix DMC-GF8









































































































































































































































































































































































Search results

Summary of Contents for Lumix DMC-GF8

Reviews:

Related manuals for Lumix DMC-GF8

Brands by name

Popular brands

Panasonic Lumix DMC-GF8, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-GF8

Reviews:

Related manuals for Lumix DMC-GF8

Brands by name

Popular brands