Panasonic Lumix DMC-GF8 Page 31 Operating Instructions Manual Download

Page: 31 / 360

2. Getting Started/Basic Operations

• Remove the lens rear cap from the lens.
• If the body cap is fitted to the camera, remove it.

Align the lens fitting marks

and then rotate the lens in the direction of

the arrow until it clicks.

• Do not press the lens release button

when you attach a lens.

• Do not try to attach the lens when holding it at an angle to the camera body as the lens mount

may get scratched.

• Do not insert your fingers into the mount when the lens and body cap

are removed from the camera body.

• It is recommended to attach the lens cap or attach the MC Protector

(optional) to protect the lens surface when carrying.

(P319)

When using the interchangeable lens (H-FS12032/H-FS35100)

Rotate the zoom ring of the lens.

When using the interchangeable lens (H-PS14042)

Move the zoom lever of the lens.

Tele

Wide

• If you operate the zoom after bringing the subject into focus, the

subject may go out of focus slightly. Operate the zoom first.

• You can enhance the telescopic effect by setting [Ex. Tele Conv.]

(Photo), [Ex. Tele Conv.] (Motion Picture), and [Digital Zoom].

(P193)

Attaching the lens

Zoom operations

Summary of Contents for Lumix DMC-GF8









































































































































































































































































































































































Search results

Summary of Contents for Lumix DMC-GF8

Reviews:

Related manuals for Lumix DMC-GF8

Brands by name

Popular brands

Panasonic Lumix DMC-GF8, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-GF8

Reviews:

Related manuals for Lumix DMC-GF8

Brands by name

Popular brands