Panasonic Lumix DMC-GF8, Operating Instructions Manual

Page: 298 / 360

11. Using the Wi-Fi function
298
[Wi-Fi Setup] Menu
Configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
Select the menu. (P53)
• When [ON] is selected, you can also set up a connection by scanning a QR code. (P257 , 259)
• Refer to P284
for details.
• For details on how to enter characters, refer to “Entering Text” section on
P69 .
• If you are using the PC with standard settings, you do not need to change the workgroup.
>
[Setup]
>
[Wi-Fi]
>
[Wi-Fi Setup]
>
Desired item to be set
[Wi-Fi Password]
You can improve security by enabling password entry for a direct
connection to a smartphone.
[ON]:
Connects the camera and a smartphone using an SSID and
password.
(P257)
[OFF]:
Connects the camera and a smartphone using an SSID.
(P256)
[LUMIX CLUB]
Acquires or changes the “LUMIX CLUB” login ID.
[PC Connection]
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as
the destination PC is required.
(The default setting is “WORKGROUP”.)
[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
[Restore to Default]:
Restores the default state.
[Device Name]
You can change the name of this unit.
1
Press [DISP.].
2
Enter the desired device name.
• For details on how to enter characters, refer to “Entering Text”
section on P69 .
• A maximum of 32 characters can be entered.
MENU