Panasonic Lumix DMC-GF8 Page 19 Operating Instructions Manual Download

Page: 19 / 360

Getting Started/Basic Operations

Attaching the Shoulder Strap

• We recommend attaching the shoulder strap when using the camera to prevent it from

dropping.

Pass the shoulder strap through the
shoulder strap eyelet on the camera body.

: Shoulder strap eyelet

Pass the end of the shoulder strap through
the ring in the direction of the arrow and then
pass it through the stopper.

Pass the end of the shoulder strap through
the hole on the other side of the stopper.

Pull the other side of the
shoulder strap and then
check that it will not come
out.

• Perform steps

and then

attach the other side of the
shoulder strap.

• Use the shoulder strap around your shoulder.

– Do not wrap the strap around your neck.

It may result in injury or accident.

• Do not leave the shoulder strap where an infant can reach it.

– It may result in an accident by mistakenly wrapping around the neck.

Summary of Contents for Lumix DMC-GF8









































































































































































































































































































































































Search results

Summary of Contents for Lumix DMC-GF8

Reviews:

Related manuals for Lumix DMC-GF8

Brands by name

Popular brands

Panasonic Lumix DMC-GF8, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-GF8

Reviews:

Related manuals for Lumix DMC-GF8

Brands by name

Popular brands