Home
/
Panasonic
/
Lumix DMC-GF8
/
Operating Instructions Manual

Panasonic Lumix DMC-GF8, Operating Instructions Manual, Page: 140 / 360

Share

Page: 140 / 360

Panasonic Lumix DMC-GF8 Operating Instructions Manual Download Page 140

5. Focus and Brightness (Exposure) Settings

140

Aim the AF tracking frame over the subject, and press
the shutter button halfway.

A

AF tracking frame

• AF area will turn green when the camera detects the subject.
• The AF area turns yellow when the shutter button is released.
• Lock is cancelled when [MENU/SET] is pressed.

Touch the subject.

• Perform the operation after cancelling the touch shutter function.
• The AF area turns yellow while the subject is locked.
• Lock is cancelled when [

] is touched.

• If it fails to lock, AF area will flash in red, and disappear. Try to lock again.
• When AF tracking fails, [

Ø

] is set.

Locking the subject to be tracked (

[Tracking])

Button operation

Touch operation

A

«
...
138
139
140
141
142
...
»

Summary of Contents for Lumix DMC-GF8









































































































































































































































































































































































Reviews:

No comments