Panasonic Lumix DMC-GF7 Operating Instructions For Advanced Features Download Page 37

Page: 37 / 359

2. Getting Started/Basic Operations

You can adjust the angle of the monitor.

•

Be careful not to catch your finger, etc. in the monitor.

•

When rotating the monitor, be careful not to apply too much force.
This may cause scratches and malfunctions.

•

When not using this unit, close the monitor completely back to the
original position.

∫

Recording from a variety of angles

The monitor can be rotated to suit your needs. This is convenient as
it allows you to take pictures from various angles by adjusting the monitor.
•

Do not cover the AF Assist Lamp with your fingers or other objects.

Monitor

Self shot

Taking pictures at a low angle

•

If the monitor is rotated as shown in the illustration,
the Self Shot Mode starts.

(P80)

Summary of Contents for Lumix DMC-GF7








































































































































































































































































































































































Search results

Summary of Contents for Lumix DMC-GF7

Reviews:

Panasonic Lumix DMC-GF7, Operating Instructions For Advanced Features, Page: 37 / 359

Search results

Summary of Contents for Lumix DMC-GF7

Reviews: