Panasonic Lumix DMC-GF2 Operating Instructions Manual Download

Page: 37 / 218

- 37 -

Basic

Applicable modes:

Just by touching the subject to focus, it will focus on the subject and take the picture
automatically.

Touch [

] in Recording Mode.

• Icon will change to [

], and taking a picture with the

Touch Shutter function becomes possible.

Touch the subject you wish to focus on, and then
take a picture.

Rough indication of the area that can be focused with

the Touch Shutter

• AF area with same function as [

] in AF Mode is

displayed at the position you touch, and a picture is

taken when it is focused. (It cannot be set to edge of the screen.)

• If the histogram is displayed on top of the subject you want to touch, touch the subject

after first moving the histogram.

(P68)

Touch [

] to cancel the Touch Shutter function.

Note

• If [FOCUS PRIORITY] is [ON], when the Focus Mode is set to [AFS] and the Touch Shutter

fails, AF area will disappear after turning red, and the picture will not be taken.

When set to [AFC], the picture will not be taken if the focus indication is flashing green, but if

the subject comes into focus while keeping touching the screen, the picture will be taken.

• Measurement of brightness is performed on the spot touched when the [METERING MODE] is

set to [

(P133)

Taking pictures using the Touch Shutter function

Summary of Contents for Lumix DMC-GF2



























































































































































































































Search results

Summary of Contents for Lumix DMC-GF2

Reviews:

Related manuals for Lumix DMC-GF2

Brands by name

Popular brands

Panasonic Lumix DMC-GF2, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-GF2

Reviews:

Related manuals for Lumix DMC-GF2

Brands by name

Popular brands