Panasonic Lumix DMC-GF2 Operating Instructions Manual Download

Page: 25 / 218

- 25 -

Preparation

About the Card

The following cards which conform to the SD video standard can be used with this unit.
(These cards are indicated as

card

in the text.)

• Only cards bearing the SDHC logo (indicating that the card conforms to SD video standards)

may be used as 4 GB to 32 GB cards.

• Only cards bearing the SDXC logo (indicating that the card conforms to SD video standards)

may be used as 48 GB and 64 GB cards.

• Use a card with SD Speed Class

with “Class 4” or higher when recording motion pictures in

[AVCHD]. Also, use a card with SD Speed Class with “Class 6” or higher when recording

motion pictures in [MOTION JPEG].

SD Speed Class is the speed standard regarding continuous writing. Check via the label on
the card, etc.

Access to the card

The access indication lights red when pictures are being recorded
on the card.

• Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor

(optional) when the access indication is lit [when pictures are being written, read or

deleted, or the card is being formatted

(P66)

]. Furthermore, do not subject the camera to

vibration, impact or static electricity.

The card or the data on the card may be damaged, and this unit may no longer operate

normally.

If operation fails due to vibration, impact or static electricity, perform the operation

again.

• Please confirm the latest information on the following website.

http://panasonic.jp/support/global/cs/dsc/

(This Site is English only.)

About cards that can be used with this unit

Type of card which can be

used with this unit

Remarks

SD Memory Card
(8 MB to 2 GB)

• SDHC Memory Card can be used with SDHC Memory Card

or SDXC Memory Card compatible equipment.

• SDXC Memory Card can only be used with SDXC Memory

Card compatible equipment.

• Check that the PC and other equipment are compatible when

using the SDXC Memory Cards.

http://panasonic.net/avc/sdcard/information/SDXC.html

SDHC Memory Card
(4 GB to 32 GB)
SDXC Memory Card
(48 GB, 64 GB)

e.g.:

Summary of Contents for Lumix DMC-GF2



























































































































































































































Search results

Summary of Contents for Lumix DMC-GF2

Reviews:

Related manuals for Lumix DMC-GF2

Brands by name

Popular brands

Panasonic Lumix DMC-GF2, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-GF2

Reviews:

Related manuals for Lumix DMC-GF2

Brands by name

Popular brands