115
VQT2G62
Advanced (Recording pictures)
Note
•
Return the setting to [HOME] when the vacation is finished by performing steps
1
,
2
and
3
.
•
If [HOME] is already set, change only the travel destination, and use.
•
If you cannot find the travel destination in the areas displayed on the screen, set by the time
difference from the home area.
Using the [REC] Mode Menu
•
[METERING MODE], [I.EXPOSURE], and [DIGITAL ZOOM] are common to both the [REC]
mode menu and [MOTION PICTURE] mode menu. Changing these settings in one of these
menus is reflected in other menu.
For details on [REC] mode menu settings, refer to P28.
You can select colour characteristics for your pictures from among 9 sets, much as you
would select a film for a film camera.
Select the Film Mode setting according to the conditions and the nature of the recording.
Applicable modes:
[You can only select [STANDARD] and [STANDARD] (
) in [
], [
¿
] mode.]
Note
•
Refer to P82 for details.
[FILM MODE]
Item
Effect
[STANDARD] (COLOUR)
This is the standard setting.
[DYNAMIC] (COLOUR)
The saturation and contrast of the stored colours are increased.
[NATURE] (COLOUR)
Brighter red, green and blue. Enhanced beauty of nature.
[SMOOTH] (COLOUR)
The contrast is lowered for smoother and clearer colour.
[NOSTALGIC] (COLOUR)
Lower saturation and contrast. Reflecting passage of time.
[VIBRANT] (COLOUR)
Higher saturation and contrast than dynamic.
[STANDARD] (
)
This is the standard setting.
[DYNAMIC] (
)
The contrast is increased.
[SMOOTH] (
)
Smooths the picture without losing the skin texture.
[MY FILM 1]/[MY FILM 2]
The saved setting is used.
[MULTI FILM]
It will take pictures changing the type of film in accordance with
the setting every time the shutter button is pressed. (Up to 3
pictures)
DMC-GF1GN-VQT2G62_eng.book 115 ページ ２００９年８月２０日 木曜日 午前１１時７分
